Swnsfc4, Swnsipnxport, Swnswwn – Dell POWEREDGE M1000E User Manual
Page 178: Swnshardaddr, Event group, Swevent, Sweventtraplevel, Sweventnumentries, Sweventtable, Swevententry
158
Fabric OS MIB Reference
53-1002750-01
Event group
6
Event group
swEventTable identifies the error log messages by the switch. It can only have a maximum of 1024
entries.
swNsFc4
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11
Read only
The FC-4s supported by the port, as defined in FC-GS-2.
swNsIpNxPort
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1
2
Read only
The object identifies IpAddress of the Nx_Port for the entry.
swNsWwn
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1
3
Read only
The object identifies the World Wide Name (WWN) of the
Fx_Port for the entry.
swNsHardAddr
1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14
Read only
The object identifies the 24-bit hard address of the node for the
entry.
TABLE 51
Object and OID
Access
Description
TABLE 52
Object and OID
Access
Description
swEvent
1.3.6.1.4.1.1588.2.1.1.1
.8
Not
accessible
The OID sub-tree for switch event group.
swEventTrapLevel
1.3.6.1.4.1.1588.2.1.1.1
.8.1
Read-write
Deprecated.
, in the absence of swEventTrapLevel, specifies
the trap severity level of each defined trap recipient host. This object
specifies the swEventTrap level in conjunction with an event’s severity
level. When an event occurs, and if its severity level is at or below the
value specified by the object instance, the agent sends the associated
swEventTrap to configured recipients.
This object is obsoleted by
and
swEventNumEntries
1.3.6.1.4.1.1588.2.1.1.1
.8.4
Read only
The number of entries in the event table. For Fabric OS v6.0 and later,
the value ranges from 0 to 1024.
swEventTable
1.3.6.1.4.1.1588.2.1.1.1
.8.5
Not
accessible
The table of event entries. The events will be received from the CHASSIS
and the created logical switches.
Only external RASlog messages are supported. These external messages
are documented in the Fabric OS Message Reference.
swEventEntry
1.3.6.1.4.1.1588.2.1.1.1
.8.5.1
Not
accessible
An entry of the event table.
swEventIndex
1.3.6.1.4.1.1588.2.1.1.1
.8.5.1.1
Read only
Every RASLOG message is identified with a unique number which is
swEventIndex.