Dell POWEREDGE M1000E - Manual (Page 107)

Fabric OS MIB Reference 87
53-1002750-01
FCFABRIC-ELEMENT-MIB (experimental branch)
4
FCFABRIC-ELEMENT-MIB (experimental branch)
NOTE
The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x.
This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB
(in the experimental branch), including the following:
• FCFABRIC-ELEMENT-MIB organization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
• Definitions for FCFABRIC-ELEMENT-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
• fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
• fcFeOp group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
• fcFeError group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
• fcFeAcct group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
• fcFeCap group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOTE
Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects
except
“fcFxPortPhysAdminStatus” .
The descriptions of each of the MIB variables in this chapter come directly from the
FCFABRIC-ELEMENT-MIB itself. The notes that follow the descriptions typically pertain to
Brocade-specific information and are provided by Brocade.
The object types in FCFABRIC-ELEMENT-MIB are organized into the following groups:
• Configuration
• Operational
• Error
• Accounting (not supported)
fcFxPortCapIntermix
1.3.6.1.2.1.75.1.5.1.1.8 Read only A flag indicating whether the Fx_Port is capable of supporting the
intermixing of Class 2 and Class 3 frames during a Class 1
connection. This flag is only valid if the port is capable of
supporting Class 1 service.
fcFxPortCapStackedConnMode
1.3.6.1.2.1.75.1.5.1.1.9 Read only A value indicating the mode of Stacked Connect request that the
Fx_Port is capable of supporting.
fcFxPortCapClass2SeqDeliv
1.3.6.1.2.1.75.1.5.1.1.10 Read only A flag indicating whether the Fx_Port is capable of supporting
Class 2 Sequential Delivery.
fcFxPortCapClass3SeqDeliv
1.3.6.1.2.1.75.1.5.1.1.11 Read only A flag indicating whether the Fx_Port is capable of supporting
Class 3 Sequential Delivery.
fcFxPortCapHoldTimeMax
1.3.6.1.2.1.75.1.5.1.1.12 Read only The maximum holding time (in microseconds) that the Fx_Port is
capable of supporting.
fcFxPortCapHoldTimeMin
1.3.6.1.2.1.75.1.5.1.1.13 Read only The minimum holding time (in microseconds) that the Fx_Port is
capable of supporting.
TABLE 31
Object and OID Access Description