Dell POWEREDGE M1000E - Manual (Page 169)

Fabric OS MIB Reference 149
53-1002750-01
Switch Fabric group
6
Switch Fabric group
FC8-48 7 sensors
FC8-64 8 sensors
FC8-32E 7 sensors
FC8-48E 7 sensors
CP8 4 sensors
Core8 4 sensors
CR4S-8 4 sensors
TABLE 47 Blade table (Continued)
Model Temp sensors
TABLE 48
Object and OID Access Description
swFabric
1.3.6.1.4.1.1588.2.1.1.1
.2 Not
accessible The OID sub-tree for the switch Fabric group.
swDomainID
1.3.6.1.4.1.1588.2.1.1.1
.2.1 Read-write The current Fibre Channel domain ID of the switch. To set a new value,
the switch (swAdmStatus) must be in offline or testing state.
swPrincipalSwitch
1.3.6.1.4.1.1588.2.1.1.1
.2.2 Read only Indicates whether the switch is the principal switch.
Possible values are:
•
yes (1)
•
no (2)
swNumNbs
1.3.6.1.4.1.1588.2.1.1.1
.2.8 Read only The number of inter-switch links (ISLs) in the (immediate) neighborhood.
swNbTable
1.3.6.1.4.1.1588.2.1.1.1
.2.9 Not
accessible This table contains the ISLs in the immediate neighborhood of the switch.
swNbEntry
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1 Not
accessible An entry containing each neighbor ISL parameters.
swNbIndex
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.1 Read only The index for neighborhood entry.
swNbMyPort
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.2 Read only This is the port that has an ISL to another switch.
This value is the same as the physical port number of the local switch +1.
The valid values for the Brocade 12000, 24000, and 48000 directors are
1 through the maximum number of ports +1.
swNbRemDomain
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.3 Read only This is the Fibre Channel domain on the other end of the ISL.
This is the domain ID of the remote switch.Valid values are 1 through 239
as defined by FCS-SW.