Installing a speaker, Removing a speaker – Dell OptiPlex 330 (Late 2007) User Manual
Page 93
Installing a Speaker
1.
Follow the procedures in
Before You Begin
.
2.
Remove the cover of your computer (see
3.
Insert the speaker into the chassis of the computer.
4.
Connect the cables to the system board.
5.
Replace the computer cover.
6.
Turn on power to the computer.
Removing a Speaker
1.
Follow the procedures in
Before You Begin
.
2.
Remove the cover of your computer (see
3.
Disconnect the cables from the system board.
4.
Remove the speaker from the chassis of the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.