Dell OptiPlex 330 (Late 2007) - Manual (Page 50)

5. Reattach the drive panel to the front of the computer.
The drive panel only fits when it is correctly oriented.
Floppy Drive
Removing a Floppy Drive
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the bezel (see Removing the Bezel ).
4. Disconnect the power and data cables from the back of the floppy drive.
5. Disconnect the data cable from the system board.
6. Slide the drive release latch downward and hold it in place. Without releasing the latch, slide the floppy drive out of the computer.
1 optical-drive panel insert 2 floppy-drive panel insert
3 holder for shoulder screws
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from
the electrical outlet before removing the cover.
NOTE: If you are adding a floppy drive, see Installing a Floppy Drive .