Desktop computer parts, Removing the computer cover – Dell OptiPlex 330 (Late 2007) User Manual
Page 75

Back to Desktop Contents Page
Back to Main Page
Desktop Computer Parts
Dell™ OptiPlex™ 330 User's Guide
Removing the Computer Cover
1.
Follow the procedures in
Before You Begin
.
2.
If you have installed a padlock through the padlock ring on the back panel, remove the padlock.
3.
Slide the cover release latch back as you lift the cover.
4.
Pivot the cover up using the hinge tabs as leverage points.
5.
Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from
the electrical outlet before removing the cover.
CAUTION:
Some of the parts described in this chapter may be replacable by a certified service technician only and are not custom replacable.
NOTE:
Ensure that sufficient space exists to support the removed cover.
NOTICE:
Ensure that you are working on a level, protected surface to avoid scratching either the computer or the surface on which it is resting.
1
security cable slot
2
cover release latch
3
padlock ring