Dell OptiPlex 330 (Late 2007) - Manual (Page 90)

5. Connect the power and data cables to the drive.
6. Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into place.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the computer cover (see Replacing the Computer Cover ).
9. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
10. Enter system setup (see Entering System Setup ) and select the appropriate Drive option.
11. Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics ).
Replacing the Optical Panel Insert
1. Align the optical panel. Insert along the edges of the empty slot for the optical drive.
2. Push the panel. The optical panel insert is locked in place.
Battery
Replacing the Battery
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
NOTE: To comply with FCC regulations, it is recommended that you replace the optical panel insert whenever the optical disc is removed from the
computer.