Dell PowerEdge M820 (for PE VRTX) User Manual
Page 119
Error Code
Message Information
PST0139
Message
Keyboard controller failed.
LCD Message
Keyboard controller failed. Power cycle system.
Details
System BIOS detected a failure with the Keyboard Controller.
Action
Remove and reapply input power. If the issue persists, see
.
PST0140
Message
System management interrupt initialization failed.
LCD Message
SMI initialization failed. Power cycle system.
Details
System BIOS failed to initialize the system management
interrupt.
Action
Remove and reapply input power. If the issue persists, see
.
PST0141
Message
QuickPath Interconnect (QPI) fatal error.
LCD Message
QuickPath Interconnect (QPI) fatal error.
Details
Quick Path Interconnect failed during system POST.
Action
Reboot the system. If problem persists, remove input power
and re-seat processors.
PST0142
Message
MRC fatal error.
LCD Message
Memory initialization error.
Details
BIOS Memory testing failed.
Action
Compare system memory installation to supported system
memory configurations. Reduce system configuration to
minimum memory configuration.
PST0143
Message
Intel Trusted Execution Technology (TXT) fatal error.
LCD Message
Intel Trusted Execution Technology (TXT) fatal error.
Details
TXT boot failed. This could be related to memory errors or
an error with the system TXT configuration. A socketed TPM
module may have been removed.
Action
Check TPM presence. Remove and reapply input power. If
the issue persists, see
PST0192
Message
Shut-down test failed.
LCD Message
Shut-down test failed. Power cycle system.
119