Dell PowerEdge M820 (for PE VRTX) User Manual
Page 122
Error Code
Message Information
Action
Verify the input source is attached to the power supply.
Verify the input power is within the operating requirements
for the power supply.
PSU0005
Message
The power input for power supply <number> is outside of
the allowable range, but it is attached to the system.
Details
The operating requirements for the power supply may be
found in this manual or on the power supply itself.
Action
Verify the input power is within the operating requirements
for the power supply.
PSU0006
Message
Power supply <number> type mismatch.
LCD Message
Power supply <number> is incorrectly configured. Check
PSU.
Details
Power supplies should be of the same input type and power
rating.
Action
Install matched power supplies and review proper
configuration in this manual.
PSU0007
Message
Power supply <number> is operating at 110 volts, and could
cause a circuit breaker fault.
Details
A power supply that is designed to operate at 220V, but is
connected to a 110V power source requires additional
current for operation. The additional current may trip circuit-
breakers or cause other electrical issues with the input
source.
Action
Check input power source and cabling. Use recommended
input power. Review this Manual. If the issue persists, see
.
PSU0008
Message
Power supply <number> voltage rating does not match the
system's requirements.
Details
The system does not support mixed voltage power supplies.
Action
Install a power supply with the correct voltage rating.
PSU0016
Message
Power supply <number> is absent.
LCD Message
PSU <number> is absent. Check PSU.
Details
The supply has been removed or has failed.
122