Dell PowerEdge M820 (for PE VRTX) - Manual (Page 118)

Error Code Message Information
Details System BIOS detected a failure with the DMA controller
during system POST.
Action Remove and reapply input power.
PST0134
Message Interrupt controller failed.
LCD Message Interrupt controller failed. Power cycle system.
Details System BIOS detected a failure with the interrupt controller
during system POST.
Action Remove and reapply input power. If the issue persists, see
Getting Help .
PST0135
Message Timer refresh failed.
LCD Message Timer refresh failed. Power cycle system..
Details System BIOS detected a timer refresh failure during system
POST.
Action Remove and reapply input power. If the issue persists, see
Getting Help .
PST0136
Message Programmable interval timer error.
LCD Message Programmable interval timer error. Power cycle system.
Details System BIOS detected an failure with the programmable
interval timer during POST.
Action Remove and reapply input power. If the issue persists, see
Getting Help .
PST0137
Message Parity error.
LCD Message Parity error. Power cycle system.
Details System BIOS detected a parity error during post.
Action Remove and reapply input power. If the issue persists, see
Getting Help .
PST0138
Message SuperIO failed.
LCD Message SuperIO failure. Power cycle system.
Details System BIOS detected a failure with the SIO.
Action Remove and reapply input power. If the issue persists, see
Getting Help .
118