Dell PowerEdge 1800 - Manual (Page 26)

26
Indicators, Codes, and Messages
www
.dell.com | support.dell.com
PCIe Degraded Link Width
Error: Embedded
Bus# nn/Dev#nn/Funcn
Expected Link Width is n
Actual Link Width is n
Faulty PCIe controller; faulty system
board. See "Getting Help."
PCIe Degraded Link Width
Error: Slot n
Expected Link Width is n
Actual Link Width is n
Faulty or improperly installed PCIe
card in the specified slot number. Reseat the PCIe card in the specified
slot number. See "Expansion Cards." If
the problem persists, see "Getting Help."
PCIe Training Error:
Embedded
Bus# nn/Dev#nn/Funcn
Faulty PCIe controller; faulty system
board. See "Getting Help."
PCIe Training Error: Slot
n
Faulty or improperly installed PCIe
card in the specified slot number. Reseat the PCIe card in the specified
slot number. See "Expansion Cards." If
the problem persists, see "Getting Help."
Plug & Play Configuration
Error Embedded xxx
Error encountered in initializing PCI
device; faulty system board. Install the NVRAM_CLR jumper and
reboot the system. See Figure A-2 for
jumper location. If the problem persists,
see "Troubleshooting Expansion Cards"
in "Troubleshooting Your System."
Plug & Play Configuration
Error PCI_ n
Error encountered in initializing PCI
adapter.
Primary backplane is not
present
Faulty or improperly installed SCSI
backplane board. This message is not applicable to this
system.
Table 2-8. System Messages (continued)
Message Causes Corrective Actions