Dell PowerEdge 1800 - Manual (Page 106)

106
Installing Drives
www
.dell.com | support.dell.com
Figure 7-8. Removing and Installing a SATA Hard Drive
7 Install the hard-drive cage:
a With the side of the drive cage labeled "Top" facing toward the external drive bays, slide
the drive cage into the system. See Figure 7-8.
b Replace the four screws that secure the drive cage in the system.
8 Connect all power cables and interface cables to the hard drives remaining in the drive bays.
9 If your system is configured as a tower, stand the system upright.
drive-cage retention
screws (4)
hard-drive bay
drive-bay retention screws
(2 screws on each side of drive cage)
power cable
interface cable