Dell DR4000 - Manual (Page 39)

Using the System Setup Program and UEFI Boot Manager 39
2
Using the System Setup Program
and UEFI Boot Manager
The System Setup program is the BIOS program that enables you to manage
your system hardware and specify BIOS-level options. From the System Setup
program, you can:
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage system security
Entering the System Setup Program
1 Turn on or restart your system.
2 Press after you see the following message:
= System Setup
NOTE: The system does not respond until the USB keyboard is active.
If your operating system begins to load before you press , allow the
system to finish booting, and then restart your system and try again.
Responding to Error Messages
If an error message appears while the system is booting, make a note of the
message. See "System Messages" on page 22 for an explanation of the message
and suggestions for correcting errors.
NOTE: After installing a memory upgrade, it is normal for your system to
display a message that the system memory size has changed the first time you
start your system.
book.book Page 39 Friday, January 6, 2012 2:11 PM