Dell DR4000 - Manual (Page 125)

Troubleshooting Your System 125
• Hard drives
• SAS backplane
• USB memory keys
• NIC hardware key
• Expansion-card riser
• Integrated storage controller card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 61.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 149.
8 If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 84.
9 Run the appropriate Embedded System diagnostic test. See "Running the
Embedded System Diagnostics" on page 140.
If the tests fail, see "Getting Help" on page 149.
book.book Page 125 Friday, January 6, 2012 2:11 PM