Dell AXIM X30 - Manual (Page 106)

www
.dell.com | support.dell.com
106 Getting Connected
• If you are using Network Authentication (Shared mode), tap
Authentication drop-down menu, select Shared, and then select
the proper encryption method from the Data Encryption
drop-down menu.
• If you do require encryption and are provided with the key
automatically, the The key is provided for me automatically check
box, when unchecked, allows you to enter the encryption key
yourself. You can enter key values in either Alphanumeric Value or
Hexadecimal Value. The encryption key value is case-sensitive.
Consult your LAN Administrator or wireless router documentation
for the correct value.
If you are using IEEE 802.1x option you will first need to get a certificate
through a non 802.1x enabled wireless network connected to a certificate
server. Select or configure a non 802.1x enabled wireless network from
the list.
Using Cisco
®
LEAP Wireless LAN Security
Your Dell Axim supports 802.1X network authentication using Cisco LEAP.
Cisco LEAP can be configured using the Odyssey Client application.
NOTE:
Before starting, ensure that your Wireless On/Off button is in the
"On" position.
NOTE:
LEAP is not supported on a peer-to-peer network.
To start the application:
1 Tap the Start button
→
Settings
→
Connections tab
→
Odyssey
Client icon.
2 Tap Settings → Enable Odyssey to start using the client.
U7216bk0.book Page 106 Thursday, September 30, 2004 2:03 PM