Dell Intel PRO Family of Adapters User Manual
Page 125

Event
ID
Message
Severity
41
E1express:
Driver has been stopped.
Informational
42
E1express:
Driver had been started.
Informational
Below is a list of Intel network adapter custom event messages that appear in the Windows* Event Log for the following
adapters:
l
Intel® Gigabit ET Dual Port Server Adapter
l
Intel® Gigabit ET Quad Port Server Adapter
l
Intel® Gigabit ET Mezzanine Card
l
Intel® Gigabit 2P I350-t Adapter
l
Intel® Gigabit 4P I350-t Adapter
l
Intel® Gigabit 4P I350-t rNDC
l
Intel® Gigabit 4P X540/I350 rNDC
l
Intel® Gigabit 4P I350-t Mezz
l
Intel® Gigabit 2P I350-t LOM
l
Intel® Gigabit 4P I350 bNDC
l
Intel® Gigabit 2P I350 LOM
Event
ID
Message
Severity
6
PROBLEM: Unable to allocate the map registers necessary for operation.
ACTION: Reduce the number of transmit descriptors and restart.
Error
7
PROBLEM: Could not assign an interrupt for the network adapter.
ACTION: Try a different PCIe slot.
Error
23
PROBLEM: The EEPROM on the network adapter may be corrupt.
Error
24
PROBLEM: Unable to start the network adapter.
Error
25
PROBLEM: The MAC address on the network adapter is invalid.
ACTION: Visit
Error
27
Network link has been disconnected.
Warning
30
PROBLEM: The network adapter is configured for auto-negotiation but the link partner is not.
This may result in a duplex mismatch.
ACTION: Configure the link partner for auto-negotiation.
Warning
31
Network link has been established at 10Gbps full duplex.
Informational
32
Network link has been established at 1Gbps full duplex.
Informational
33
Network link has been established at 100Mbps full duplex.
Informational
34
Network link has been established at 100Mbps half duplex.
Informational
35
Network link has been established at 10Mbps full duplex.
Informational