Dell Intel PRO Family of Adapters User Manual
Page 126
Event
ID
Message
Severity
36
Network link has been established at 10Mbps half duplex.
Informational
37
PROBLEM: PCI Express bandwidth available for this adapter is not sufficient for optimal per-
formance.
ACTION: Move the adapter to a x8 PCI Express slot.
Warning
38
PROBLEM: The driver failed to initialize properly. You may not be able to change the adapter
settings.
ACTION: Restart the computer.
Warning
39
PROBLEM: The network adapter driver did not unload successfully.
ACTION: Restart the computer.
Warning
40
Intel Smart Speed has downgraded the link speed from the maximum advertised.
Informational
41
The network adapter driver has been stopped.
Informational
42
The network adapter driver has been started.
Informational
43
PROBLEM: Could not allocate shared memory necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
Error
44
PROBLEM: Could not allocate memory necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
Error
45
PROBLEM: Could not allocate a resource pool necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
Error
46
PROBLEM: Could not initialize scatter-gather DMA resources necessary for operation.
ACTION: Reduce the number of transmit descriptors and restart.
Error
47
PROBLEM: Could not map the network adapter flash.
ACTION: Try another slot.
Error
48
PROBLEM: The fan on the network adapter has failed.
ACTION: Power off the machine and replace the network adapter.
Error
49
PROBLEM: The driver was unable to load due to an unsupported SFP+ module installed in
the adapter.
ACTION: Replace the module.
Error
50
PROBLEM: The network adapter has been stopped because it has overheated.
ACTION: Restart the computer. If the problem persists, power off the computer and replace
the network adapter.
Error
51
PROBLEM: The network adapter link speed was downshifted because it overheated.
Error
52
PROBLEM: The network adapter has been stopped because it has overheated.
Error