Dell Intel PRO Family of Adapters - Manual (Page 137)

Regulatory Compliance Markings
When required these products are provided with the following Product Certification Markings:
l UL Recognition Mark for USA and Canada
l CE Mark
l FCC markings
l VCCI marking
l Australian C-Tick Mark
l Korea KCC mark
l Taiwan BSMI mark
l People's Republic of China "EFUP" mark
Class B Products
FCC Class B User Information
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following meas-
ures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
l Consult the dealer or an experienced radio/TV technician for help.
CAUTION: If the device is changed or modified without permission from Intel, the user may void his or
her authority to operate the equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Electromagnetic Compatibility Notices
FCC Declaration of Conformity Statement
The PRO/1000 PT and Gigabit VT Adapters have been tested to Comply with FCC Standards for Home or Office Use.
Intel Corporation
5200 N.E. Elam Young Parkway
Hillsboro, OR 97124-6497
Phone 1-800-628-8686
Class 1 Laser Products
The PRO/1000 PF Server Adapter contains laser devices for communication use. These devices are compliant with the
requirements for Class 1 Laser Products and are safe in the intended use. In normal operation the output of these laser
devices does not exceed the exposure limit of the eye and cannot cause harm.
For continued safe operation in case of an abnormal circumstance, always have the provided laser connector cover in
place or a compatible fiber optics cable properly connected when power is available to the product.