Dell Intel PRO Family of Adapters - Manual (Page 129)

Event
ID Message Severity
l Intel® Ethernet 10G 2P X520 Adapter
l Intel® Ethernet 10G 4P X540/I350 rNDC
l Intel® Ethernet 10G 4P X520/I350 rNDC
l Intel® Ethernet 10G 2P X520-k bNDC
55 The value of NumVFs exceeds the maximum value allowed by the driver in the current con-
figuration. The value will be set to the maximum allowed.
NOTE: This message is used only for the following adapters:
l Intel® Ethernet X520 10GbE Dual Port KX4 Mezz
l Intel® Ethernet X520 10GbE Dual Port KX4-KR Mezz
l Intel® Ethernet Server Adapter X520-2
l Intel® Ethernet Server Adapter X520-T2
l Intel® Ethernet 10G 2P X540-t Adapter
l Intel® Ethernet 10G 2P X520 Adapter
l Intel® Ethernet 10G 4P X540/I350 rNDC
l Intel® Ethernet 10G 4P X520/I350 rNDC
l Intel® Ethernet 10G 2P X520-k bNDC
Informational
Intel Advanced Network Services Messages
Below is a list of intermediate driver custom event messages that appear in the Windows Event Log.
Event
ID Message Severity
2 Unable to allocate required resources. Free some memory resources and restart. Error
3 Unable to read required registry parameters. To resolve, remove the adapter team and then
create a new team. Error
4 Unable to bind to physical adapter. To resolve, remove the adapter team and then create a
new team. Error
5 Unable to initialize an adapter team. To resolve, remove the adapter team and then create a
new team. Error
6 Primary Adapter is initialized: Informational
7 Adapter is initialized: Informational
8 Team #: Team is initialized. Informational
9 Team #: Virtual Adapter for [VID=] initialized. Informational
10 Current Primary Adapter is switching from: Informational
11 Adapter link down: Warning
12 Secondary Adapter took over: Informational
13 The has been deactivated from the team. Warning
14 Secondary Adapter has rejoined the Team: Informational
15 Adapter link up: Informational
16 Team #: The last adapter has lost link. Network connection has been lost. Error