Dell OptiPlex E1 - Manual (Page 33)

Using the System Setup Program 2-5
6\VWHP6HWXS2SWLRQV
The following subsections explain in detail each of the options on the System Setup
screen.
6\VWHP7LPH
System Time resets the time on the computer’s internal clock.
Time is kept in a 24-hour format (hours:minutes:seconds). To change the time, press
the left- or right-arrow keys to select a field, and then press <+> or <-> to increase or
decrease the number. If you prefer, you can type numbers in each of the fields.
6\VWHP'DWH
System Date resets the date on the computer’s internal calendar.
Your system automatically displays the day of the week corresponding to the settings
in the
month, day-of-month, and year fields.
To change the date, press the left- or right-arrow keys to select a field, and then press
<+> or <-> to increase or decrease the number. If you prefer, you can type numbers
in the
day-of-month and year fields.
'LVNHWWH'ULYH$DQG'LVNHWWH'ULYH%
Diskette Drive A and Diskette Drive B identify the type of diskette drives installed in
your computer. With the standard cabling configuration, Diskette Drive A (the boot
diskette drive) is the 3.5-inch diskette drive installed in the top externally accessible
drive bay; Diskette Drive B is any drive installed in the bottom externally accessible
drive bay that is connected to the system’s diskette/tape drive interface.
The option settings always match the physical locations of the drives in your com-
puter—the first drive listed is the top drive in your computer.
The Diskette Drive A and Diskette Drive B options have the following settings:
‡
5.25 Inch, 360 KB
‡
5.25 Inch, 1.2 MB
‡
3.5 Inch, 720 KB
‡
3.5 Inch, 1.44 MB
‡
Not Installed
NOTE: Tape drives are not reflected in the Diskette Drive A and Diskette Drive B
options. For example, if you have a single diskette drive and a tape drive attached to
the diskette/tape drive interface cable, set Diskette Drive A to match the characteris-
tics of the diskette drive and set Diskette Drive B to Not Installed.