Dell PowerEdge C6100 - Manual (Page 50)

50
Using the System Setup Program
LAN Configuration
Power Throttling Configuration
NOTE:
The default values are dependant on BMC setting
IP Address
Clear BMC System Event Log Clears BMC System Event Log.
BMC PEF status Displays BMC PEF status.
Set BMC NIC
(Shared default) Sets the type of BMC NIC from BIOS. BMC is reset.
Set LAN Configuration Allows LAN Configuration settings.
Option Description
Channel Number
(01 default) Enters channel number for SET LAN Config
Command. Proper value is below 16.
BMC IP address source
(DHCP default) Sets BMC IP address source from BIOS.
Option Description
Power Throttling Enable or disable Power throttling
Power CAP Enable or disable Power CAP
Chassis CAP Set Chassis CAP value
Option Description
IP Address (default value
depends on BMC setting) Enters IP address in decimal in the form of
XXX.XXX.XXX.XXX (XXX is less than 256 and in
decimal only).
NOTE:
When BMC IP status is static, IP Address is
useful
Option Description
book.book Page 50 Thursday, March 4, 2010 4:38 PM