Dell PowerEdge C6100 - Manual (Page 104)

104
Installing System Components
Figure 3-30. Removing and Installing the Lower Midplane
Installing the Midplanes
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Place the lower midplane into the chassis. See Figure 3-30.
2 Replace the screws that secure the lower midplane to the chassis.
See Figure 3-30.
3 Connect all the cables to the lower midplane. See Figure 5-9.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
4 Place the midplane holder into the chassis. See Figure 3-29.
5 Replace the screws that secure the midplane holder to the chassis.
See Figure 3-29
6 Place the mid-plane holder support into the chassis. See Figure 3-28.
1 screw (8) 2 lower midplane
1
2
book.book Page 104 Thursday, March 4, 2010 4:38 PM