Dell PowerEdge C6100 - Manual (Page 48)

48
Using the System Setup Program
System Management
Remote Access Configuration
Option Description
Server Board Part Number Displays server board part number.
Server Board Serial Number Displays server board serial number.
NIC 1 MAC Address Displays NIC1 MAC Address.
NIC 2 MAC Address Displays NIC2 MAC Address.
System Part Number Displays system part number.
System Serial Number Displays system serial number.
Chassis Part Number Displays chassis part number.
Chassis Serial Numbers Displays chassis serial numbers.
BIOS Version Displays current BIOS version.
BMC Device ID Displays BMC device ID.
BMC Firmware Revision Displays BMC firmware version.
FCB Firmware Revision Displays FCB firmware version.
Option Description
Remote Access
(Enabled default) Selects remote access type.
Serial Port Number
(COM1 default) Selects serial port for console redirection. Make sure
the selected port is enabled. This item disappears
when Remote Access is disabled.
Serial Port Mode
(115200 8,n,1 default) Selects serial port settings. This item disappears
when Remote Access is disabled.
Flow Control (None default) Selects flow control for console redirection. This item
disappears when Remote Access is disabled.
book.book Page 48 Thursday, March 4, 2010 4:38 PM