Network setup, Network environment, Introducing useful network programs – Dell 1135n Multifunction Mono Laser Printer User Manual
Page 96: Using a wired network, Embedded web service, Setip
Network setup
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
Network environment
Introducing useful network programs
Using a wired network
Installing network connected machine’s driver
IPv6 Configuration
Network environment
You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic
network settings through the machine's control panel.
The following table shows the network environments supported by the machine:
Item
Requirements
Network interface
Ethernet 10/100 Base-TX
Network operating system
Windows 2000/XP/2003/2008/Vista/7/2008 Server R2
Various Linux OS
Mac OS X 10.3 ~ 10.6
Network protocols
TCP/IPv4
DHCP, BOOTP
DNS, WINS, Bonjour, SLP, UPnP
Standard TCP/IP Printing(RAW), LPR, IPP
SNMPv 1/2/3, HTTP(S), IPSec
TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP(S), IPSec)
(See
).
Introducing useful network programs
There are several programs available to setup the network settings easily in network environment. For the network
administrator especially, managing several machines on the network is possible.
Before using the programs below, set the IP address first.
Embedded Web Service
Web server Embedded on your network machine, which allows you to:
Configure the network parameters necessary for the machine to connect to various network environments.
Customize machine settings.
(See
SetIP
This utility program allows you to select a network interface and manually configure the IP addresses for use with
the TCP/IP protocol (See
IP setting using SetIP Program (Windows)
IP setting using SetIP Program (Macintosh)
TCP/IPv6 is not supported by this program.
Using a wired network
You must set up the network protocols on your machine to use it on your network. This chapter will show you how this
is easily accomplished.
You can use network after connecting network cable to a corresponding port on your machine.