Dell 1135n Multifunction Mono Laser Printer - Manual (Page 104)

5.
6.
Turn the machine off and turn it on again.
7. Reinstall your printer driver.
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and managements.
Link-local Address: Self-configured local IPv6 address (Address starts with FE80).
Stateless Address: Automatically configured IPv6 address by a network router.
Stateful Address: IPv6 address configured by a DHCPv6 server.
Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the following option for default dynamic host
configuration:
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until TCP/IP (IPv6) appears and press OK.
4. Press the left/right arrow until DHCPv6 Config appears and press OK.
5. Press the left/right arrow to access the required value.
Router: Use DHCPv6 only when requested by a router.
DHCPv6 Addr.: Always use DHCPv6 regardless of router request.
DHCPv6 Off: Never use DHCPv6 regardless of router request.
6. Press OK.
Manual address configuration
1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See Connecting
Embedded Web Service ).
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or
click Go.
2. When the Embedded Web Service window opens, click Network Settings.
3. Click TCP/IP.
4. Enable the Manual Address In the TCP/IPv6 section.
5. Select the Router Prefix and click the Add button, then the router prefix will automatically be entered into
the address field.
Enter the rest of address (ex:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F).
6. Click the Apply button.
Connecting Embedded Web Service
1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL.
2. Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual
Address) from Network Configuration Report.
3. Enter the IPv6 addresses (ex: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.