Baumer NE131 - Manual (Page 15)

NE131 NE131
www.baumer.com 15
English
Clear totalizer
Select totalizer via key and the display will
indicate ∑. Now press the key and the value
display of totalizer starts blinking. Now press
the key to clear the totalizer.
Setting of functions
In the configuration menu you will see the
function settings that are effective when tur-
ing the counter on for the first time (factory
setting). Here you may also effect the best
setting for your task. The following table indi-
cates how to access the configuration menu as
well as how to select functions.
Hint Access can be secured by code.
Menu line no. 42
Application as a time counter
Setting as a time counter is carried out in menu
line 20 of the configuration menu. Menu line
30 contains four different time ranges to
choose from. The decimal point is automatically
set. Timing is active as long as “Count“
(terminal 4) is actuated (right-hand decimal
point flashes).
Key functions
Key Function
Call or exit configuration menu.
press simultaneous (CODE is indicated on display)
If no code is entered, quit only
Enter and confirm access code, e.g. 11.
or Select menu line number.
or Start entry and select digit (digit blinks)
or Enter function value and/or function number.
Confirm entry.
and Reset to default settings: keep button pressed
simultaneous and connect unit to the mains.
Display: CLrPro