Baumer RXA1H - Manual (Page 5)

Manual_ProCam_V1-10_EN.doc 5/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
2 General Information
2.1 System requirements
A PC with the operating system Windows 95/98/NT/2000/XP with one free RS232 serial port.
An RS485/RS232 interface converter with automatic directional switchover is required for
encoders with an RS485 interface.
2.2 Installation
The installation is menu-guided.
Please read the file "Readme.txt" on the included CD.
Note: Under Windows NT/2000 and Windows XP, the installation can only be carried out with
Administrator rights.
2.3 Software version
The version ProCam 1.10 replaces the earlier ProCam versions and is downward compatible.
2.4 Information on commissioning
- Wiring work on the encoder plug or in the switch cabinet may only be carried
out in the deenergized state. Do not connect or disconnect encoder plugs
while energized.
- Before switching on, please check and connect all connectors.
- Caution!
Incorrect encoder programming can lead to system failure.
Product information
The content or scope of this documentation can be changed at any time without prior notice.
The contents of this documentation does not represent the assurance of a certain property or
function by Baumer IVO GmbH & Co. KG.