Baumer RXA1H User Manual
Page 8
Manual_ProCam_V1-10_EN.doc
8/35
Baumer IVO GmbH & Co. KG
10.05.11
Villingen-Schwenningen,
Germany
3.2.2 Encoder connected to PC - "Automatic selection"
With an encoder selected, the encoder type can be read out (Automatic selection).
This information is necessary to provide the corresponding parameters for
programming. If the encoder or the cable connection is not properly connected, an
error message is displayed. If the automatically detected encoder does not match the
encoder rating plate, please contact Baumer IVO.
Automatically
detected
encoder model
See also other documents in the category Baumer Sensors:
- UNAR 18U6912/S14G (2 pages)
- UZAM 70P8131/S14C (3 pages)
- UZDK 30P6113 (2 pages)
- O500.GR-GW1T.72CU (4 pages)
- URAM 50N1721 (2 pages)
- FVDK 22P6101/S14C (2 pages)
- FZAM 30P5004 (2 pages)
- OZDK 10P5150/S35A (2 pages)
- FPDK 20N5101/S35A (2 pages)
- UNDK 20N6903/S35A (2 pages)
- UZAM 50N6121/S14 (2 pages)
- IFBR 17N17T1/S14L-9 (2 pages)
- OPDM 16P5102 (2 pages)
- OPDK 14P5901/S14 (2 pages)
- OEDK 14P5101/S35A (2 pages)
- OBDM 12N6910/S35A (4 pages)
- MTRM 16G2524/M300 (2 pages)
- UR18.DA0-UA1B.7BO (4 pages)
- GK473 (32 pages)
- GK473 (24 pages)
- GK473 (31 pages)
- GK473 (16 pages)
- UNDK 30N1713/S14 (2 pages)
- FKDM 22P1911/S14F (4 pages)
- UNDK 09G8914/D1 (3 pages)
- Speed switches DSL (22 pages)
- OADM 20U2480/S14C (4 pages)
- FZCK 07N6901 (2 pages)
- FVDK 12P6410/S35A (2 pages)
- G1-G2-G0-GE-GB-GXxxx (18 pages)
- G1-G2-G0-GE-GB-GXxxx (52 pages)
- G1-G2-G0-GE-GB-GXxxx (26 pages)
- URDK 10N8914 (2 pages)
- OPDK 14P3902/S35A (2 pages)
- UNAM 30U9103/S14 (2 pages)
- PA203 (30 pages)
- O300.RP-PV1T.72N (4 pages)
- BMxx, GBxxx-GXxxx - EtherCAT / PoE from version ,5.0 (30 pages)
- OADM 12U6430/S35A (4 pages)
- OADM 13U7580/S35A (4 pages)
- O500.RP-NV1T.72CU (4 pages)
- FHDK 14N6901/S35A (2 pages)
- O500.RP-PV1T.72CU (4 pages)
- OZDK 10P5150 (2 pages)
- G1-G2-GB-GXxxx (40 pages)