Baumer RXA1H - Manual (Page 19)

Manual_ProCam_V1-10_EN.doc 19/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.2.10 Read encoder data
The connected encoder is read out. Before the tabs "Resolution", "Outputs" and "Program" are
overwritten, they can be saved. If the connected encoder type does not match the one
selected, the following error message appears:
If the set encoder and connected encoder types are identical, the data are read in and
displayed.
4.2.11 Send encoder data
The encoder connected to the interface is programmed with the set parameters. If the
connected encoder type does not match the one selected, the following error message
appears:
During transfer the data in the encoder are saved in a non-volatile manner. The transfer can
take several seconds and is displayed as follows: