Baumer RXA1H - Manual (Page 28)

Manual_ProCam_V1-10_EN.doc 28/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.5.9 Status
Input parameters for status:
0 = Default cam bidir
(bidirectional, acting in both rotating directions)
1 = Time cam bidir (bidirectional, acting in both rotating directions)
2 = Default cam pos (only acting in the positive rotating direction)
3 = Default cam neg (only acting in the negative rotating direction)
4 = Time cam pos (only acting in the positive rotating direction)
5 = Time cam neg (only acting in the negative rotating direction)
4.5.10 Name outputs
It is possible here to enter a name consisting of up to 16
characters for each output. The names are constantly
visible in the cam tables during programming and
simplify the entry of the switching points in this way.
As the names of the outputs are saved in the encoder
together with the cams, they are not only available on
the PC, but also on any connected display and operating
device.