Baumer RXA1H - Manual (Page 25)

Manual_ProCam_V1-10_EN.doc 25/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
Save file:
The current data are saved in the PC. The same function can also be run with "File
⇒ Save".
Open file:
Programming stored in the PC can be loaded. The same function can also be run with "File
⇒
Open".
4.4.2 Send cam program
Send data
The current programming is saved in the encoder. The same function can also be run with
"Extras
⇒ Send data".
Request data
The data are requested from the connected encoder. The same function can also be run with
"Extras
⇒ Data".
4.4.3 Activate cam program
See Chapter 4.6
4.4.4 Dialog window
Information texts on the parameter currently selected are shown in the dialog window.
The information texts describe the respective parameter with brief explanations.
4.4.5 Program status
The current programs are displayed in this window.