Baumer RXA1H - Manual (Page 27)

Manual_ProCam_V1-10_EN.doc 27/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.5.2 Cam memory
The "Cam memory" display shows how many of the total number of available cams have
already been used for switching processes (in the picture 30 of 1,024).
4.5.3 Cam No.
The cam number is permanently specified in each case and cannot be changed.
4.5.4 Output
Enter the number of the output this cam is to act on here. The value range is 1 - 16. If you
enter a "0", the cam remains inactive.
4.5.5 Name
The field shows the plain text name of the output, provided one has been entered (see Section
4.5.10)
4.5.6 ON/OFF
The information in the fields "ON" and "OFF" determine the switching points of the cam.
The values are the position of the encoder in the previously selected resolution (also see the
"Resolution" tab).
If a time cam is to be programmed, the "OFF" field is the switching time of the time cam in ms
(1-65000 milliseconds).
4.5.7 DTC ON/DTC OFF
The fields "DTC ON" and "DTC OFF" show the programmed dead-time compensation for the
output this cam acts on. To program the dead time itself, see 4.5.11.
4.5.8 Lock
The "Locked" field indicates the locking status of the output on which this cam acts. To set or
delete the locking function itself, see 4.5.12.