Cooper Instruments & Systems ELF 4200 Flexiforce Paper Thin Sensor - Manual (Page 40)

CF10 37 6/24/08 Rev. H
14. If you wish to save the calibration file for future use, select Tools -> Save Calibration, and enter the desired
destination and file name in the Save As dialog box. Calibration files must be saved with the *.clb file
extension. Sensitivity settings are saved with calibration files.
15. If you wish to recalibrate the sensor during the same testing session, you may either select File -> New to get a
new Real-time Window, or select Tools -> Uncalibrate to reset the calibration of the current window. A