Cooper Instruments & Systems ELF 4200 Flexiforce Paper Thin Sensor - Manual (Page 27)

CF10 24 6/24/08 Rev. H
The Threshold may be set for each individual COM port, so that each sensor has a different threshold. This may
be used in combination with the Trigger Force value to begin recording when force is exerted on a specific sensor.
Note: If no calibration has been performed, the only available units will be shown as a Percentage. If a
calibration has been performed, you may select from a number of force units.
ELF Hi-Speed Recording Parameters
If you have purchased the ELF Hi-Speed system, the software will record at a higher range of speeds (up to 5760
Hz) , and your Recording Parameters dialog box will look slightly different. Your choices for Recording Type include
Infinite
, Frame Count, and High Speed.