Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 115)

Chapter 6. Data Formatting and Reports
107
Fill Labels
After you have created a label, you can enter the information to be included in that
label immediately, if desired. Select Label Contents from the EDIT menu. This
opens the Fill Labels dialog box.
Figure 86. Fill Labels dialog box.
In this dialog, each label name is followed by a text field. Enter the label information
to be printed on each report. Click on OK when you are finished.
Manually Editing Data
Microplate Manager allows you to manually edit your raw data.
All changed numbers will be permanently shaded in gray to distinguish them from
unedited data.
For Kinetic data, select Edit Velocities... from the EDIT menu. For Endpoint data,
select Edit Raw Data... from the EDIT menu.