Bio-Rad ddPCR™ Supermix for Probes - Manual (Page 15)

Chapter 2 Using the QX200 Droplet Reader
QX200 Droplet Reader and QuantaSoft Software Instruction Manual QX200 Droplet Reader and QuantaSoft Software Instruction Manual | 7
Chapter 2 Using the QX200 Droplet Reader
5. In QuantaSoft software, click Setup in the left navigation bar to define your experiment (see Chapter 3),
then click Run. The run indicator light (far right) flashes green to indicate droplet reading is in progress.
6. When droplet reading is complete, all four indicator lights are solid green. Open the door and remove the
plate holder from the unit. Remove the 96-well PCR plate from the holder and discard it.
Correct and incorrect placement of the plate holder. Note the release tabs are in the “up” position in the incorrect placement at right.
Incorrect Correct