B&G Network GPSplus - Manual (Page 8)

8
PAGE 3 PRESENT POSITION, COG AND SOG
Latitude and Longitude of present position on the main
display and SOG and COG.
NOTE: The displayed values for SOG and COG will be in
the same units as selected for the previous page
PAGE 4 CURRENT FLOW
KTS
POS
Direction of Current
Speed of Current
POS key
Magnetic Legend
Knots Legend
The local influences of sea current on the vessel.
Direction of sea current, in degrees Magnetic(M) or True(T).
Speed of sea current, in knots (KTS), kilometres/hour
(KPH), or miles/hour (MPH).
NOTE: This information can only be displayed when the
GPSPlus is receiving speed and heading data from an
integrated Network System.
PAGE 5 RECEIVER INFORMATION PAGES
One of three different pages will be displayed depending
upon the receiver selected.
GPS SATELLITE INFORMATION:
FIX
POS
Signal to noise ratio
Satellite PRN
POS key
Satellite azimuth
The selected satellite and total
number of satellites in view
Satellite elevation
The fifth POS key page displays information about the
receiver that has been selected to supply positional data
(see SETUPS ON THE GPSPlus to select different receiver
inputs).
Data can be displayed about each satellite being tracked by
the GPSPlus.
Satellite signal to noise ratio is displayed in dB: the higher
the number the better the signal strength.
The satellite number is the satellite transmitted PRN.
When the SETUP control knob is turned, information is
displayed about each satellite being tracked.