B&G Network GPSplus - Manual (Page 66)

67
ROUTING THE GPS ANTENNA CABLE
The GPS antenna unit is supplied with a 9 metre (30ft),
shielded multicore cable. The cable should be routed to the
GPSPlus Display unit junction box and then cut to length.
For connection details refer to the installation sheet supplied
with your system.
When routing the antenna cable consideration should be
given to the following guidelines:
AVOID:
• Sharp bends or kinks in the cable
• Hot surfaces e.g. exhaust manifolds or stacks
• Rotating or reciprocating equipment
• Sharp or abrasive surfaces
• Door, hatch and window jambs
• Corrosive fluids or gases