B&G Network GPSplus - Manual (Page 56)

57
MULTIPLE GPS PLUS DISPLAY INSTALLATIONS
Installations with two or more GPS
plus
displays fitted must
select which GPS
plus
display will receive the data. When the
GPS
plus
displays and GPS antenna are powered up the
display should show the following:
If the above is not shown then press the SETUP key until
the following is displayed:
Press the ENTER key, the display will now show nOt USEd.
Turn the ▼ STEP ▲ knob. If the GPS has not yet locked
onto the position then nOt USEd will remain. If the GPS has
locked then nOt USEd will be replaced with the Latitude
and Longitude.
Press the ENTER key to memorise the selection. Press the
POS key to return to the position page.