B&G Network GPSplus - Manual (Page 27)

28
ROUTE PLANNING PAGE
WAYPOINT TO WAYPOINT RANGE AND BEARING
The GPSPlus display PLANNING PAGE allows the range
and bearing to be calculated between any two, library
waypoints. This facility is very useful when planning a route.
1. Press the ROUTE key
until the display shows
PLANNING PAGE, FROM
and TO will be showing on
the text display. FROM will
flash.
2. Turn the ▼ STEP ▲
knob to cycle through the
waypoints in the library
until the desired waypoint
is displayed e.g. BUOY.
Press the ENTER key to
select the displayed
waypoint. TO will now
flash. 3. Turn the ▼ STEP ▲
knob to select the other
waypoint from the library
e.g. FISHIN. Press the
ENTER key to select the
displayed waypoint. 4. The display will now
show the inter-waypoint
range and bearing. The
waypoint name or number
will continue to flash so
that other selections can
be made.