B&G Network GPSplus - Manual (Page 14)

14
MAN OVERBOARD (MOB) FACILITY
NAV
WPT/MOB
1. Press and Hold the
WPT/MOB key for 3
seconds.
2. The display will flash
MANOVER and the
internal alarm will sound.
Press any key to silence
the alarm. 3. The display will now
show the range and
bearing to the MOB event.
This display can also
obtained by pressing the
NAV key. 4. Press the WPT/MOB
key to display the latitude
and longitude of the MOB
event.
POS
WPT/MOB
WPT
5. Press the POS key to
display current position in
latitude and longitude. 6. Press and hold the
MOB/WPT key for 3
seconds to return to
normal operation. 7. The MOB event is
stored in the waypoint
library as WPT 230.
This waypoint will not be
automatically overwritten
by another MOB event, so it must be erased from the
waypoint library using the
waypoint erase facility.