Great Plains YP625PD Operator Manual - Manual (Page 25)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 21
02/23/2011 Table of Contents Index 401-754M
Transport Steps
Transport only with markers stowed (page 32).
1. Check that planter is securely hitched to a sufficient
tractor or towing vehicle (page 14).
2. Always use a locking-style hitch pin sized to match
holes in hitch and draw-bar (minimum
1-inch-diameter, heat-treated pin).
3. Attach safety chain to tractor or towing vehicle with
enough slack to permit turning (page 14).
4. Verify correct operation of lights.
5. Fold markers if unfolded (Option, page 32).
6. Raise planter (page 19).
7. Install cylinder locks (page 19).
8. Unload hoppers and tank(s) before transporting if at
all possible. The planter can be transported with a
full material load, but the added weight increases
stopping distance and decreases maneuverability.
Increased Hazards and Wear Risks:
Seed may be loaded prior to travel, but increases stopping
distance, increases the need for caution in turns and braking,
and increases tire wear.
9. If any seed is in hoppers or delivery hoses, close
seed inlet shutters at meters (page 57).
10. Check that tires are properly inflated (page 97).
11. Plan the route. Avoid steep hills.
12. Always have lights on for highway operation.
13. Do not exceed 32 kph. Comply with all national,
regional and local laws when traveling on public
roads.
14. Remember that the planter may be wider than the
tractor or towing vehicle. Allow safe clearance.
15. Transport slowly over uneven or rough terrain.