Great Plains ADC2220 Operator Manual - Manual (Page 110)

106 ADC2220 Table of Contents Index Great Plains Manufacturing, Inc.
167-073M Table of Contents Index 2012-10-17
Alternate Flute Sets
The standard model ADC2220 Air Drill Carts have two
fluted wheels (“stars”) and two filler rings in each meter
compartment.
If your seeding rates need to be higher or lower than
those listed in the Seed Rate charts, these accessories
replace the existing shaft assembly with one having more
stars, or smaller stars. See “Changing Meter Flutes” on
page 72 for installation instructions.
Replacing the standard 2-star shafts with 3-star shafts
increases the seeding rate by approximately 50% (150%
of standard rate). Replacing standard 2-star shafts with
4-star shafts increases the seeding rate by
approximately double (200% of standard rate). Small
Seeds stars reduce the rate to approximately 25%.
The kit required depends on the number of towers on the
implement and the number of stars desired. Order one
kit per meter (two per air cart)
Acremeter
One digital electronic acremeter is standard on the
ADC2220 air cart. If you require a replacement, or
alternate units of measure, order one of the parts below.
See “Acremeter Operation” on page 32.
Implement Towers
Stars
per
Outlet
Part
Numbers
Implement Towers
Stars
per
Outlet
Part
Numbers
ADI334 5 3 168-344S CTA4000HD 5 3 168-344S
ADI334 5 2 Small 168-443S CTA4000HD 5 4 168-348S
ADI345 5 4 168-348S CTA4000HD 5 2 Small 168-444S
ADI345 5 2 Small 168-443S NTA3010 4 3 168-344S
CTA4000 5 3 168-344S NTA3010 4 4 168-349S
CTA4000 5 4 168-348S NTA3010 4 2 Small 168-444S
CTA4000 5 2 Small 168-344S NTA3510 5 3 168-344S
NTA3510 5 4 168-348S
NTA3510 5 2 Small 168-344S
Units of Measure Acremeter Part Number
U.S. Customary 891-063C
Metric 891-064C
26335
27378