Great Plains PD8070 Operator Manual - Manual (Page 10)

6 PD8070 Table of Contents Index Great Plains Manufacturing, Inc.
401-479M Table of Contents Index 2014-07-23
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals.
▲ When ordering new parts or components, also request
corresponding safety decals.
Order new decals from your Great Plains dealer. Refer to
this section for proper decal placement.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Slow Moving Vehicle Reflector
818-055C
Above main tool bar at center;
1 total
Red Reflectors
838-266C
On the backside of each light mounting bar, and on the
main tool bar outboard of the inner two row units;
4 total
Amber Reflectors
838-265C
On the outside of the two outboard row units and on the
front and side at the front corners of the main frame;
6 total
23455
23455
23455