ClearOne MAXAttach IP - Manual (Page 33)

30 Technical Support: 800.283.5936
Program Default Gateway IP Address
1. Press and hold REDIAL/PROG until the Program icon appears on the LCD screen (Figure 3.1).
» NOTE: DHCP must be disabled in order to change the subnet mask manually.
2. Press 4 to enter the Default Gateway IP Address menu. The current default gateway IP address is displayed.
3. Press REDIAL/PROG. The current default gateway IP address flashes.
4. Press and hold CLEAR to erase the current default gateway IP address.
5. Using the number keys, enter the desired default gateway IP address.
6. Press REDIAL/PROG to save the selection; a confirmation tone plays.
7. Press CLEAR to exit programming. The phone will reboot.
Change Ringer Melody
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
2. Press 5 to enter the Ringer Melody menu. There are five available melodies.
3. Press REDIAL/PROG. The current melody selection flashes.
4. Press keys 1–5 to play the corresponding melody. The selected melody plays once.
5. Press REDIAL/PROG to save the selection - a confirmation tone plays.
6. Press CLEAR to exit programming.
Enable/Disable VLAN
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
2. Press 6 to select VLAN programming. The current VLAN setting appears on the LCD screen (Default setting is Off).
3. Press REDIAL/PROG. The current VLAN setting flashes.
4. Press keys 1 (enable) or 0 (disable) to enable or disable VLAN.
5. Press REDIAL/PROG to save the selection; a confirmation tone plays.
6. Press CLEAR to exit programming. The phone will reboot.
Program the Extension Number
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
2. Press 7 to enter the help line number.
3. Press REDIAL/PROG to save the selection - a confirmation tone plays.
4. Press CLEAR to exit programming.