ClearOne MAXAttach IP - Manual (Page 13)

10 Technical Support: 800.283.5936
Configuration: SIP Parameters
See Configuraton: SIP Configuration details on pages 21-22 for information on how to set these parameters through
the Web Portal.
<
localnum> - The unique Local Number of the specific phone being configured.
Default Value: 0
Allowable Characters: 0 - 9
< localphonename> - The unique Name assigned to the specific Local Phone being configured.
Default Value: none
Allowable String Length: 49
< sip_register_timetout> - The SIP Registration Timeout in milliseconds.
Default Value: 3600
Allowable Range: 0 - 4294967295 (0 = Disabled)
< sip_proxy_type> - The SIP Proxy device Type.
Default Value: 0
Allowable Values:
0 = Cisco Proxy
1 = Generic Proxy
< sip_proxy_enable> - Enable SIP proxy registration.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0
Allowable Range:
0 - Disable
1 - Enable
< sip_proxy_server> - SIP proxy server to register with when is enabled. This parameter can be
an IP address, a hostname, or FQDN.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0.0.0.0
Allowable String Length: 79
< sip_proxy_port> - The default port with which to communicate to the SIP proxy.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 5060
Allowable Port Range: 1 - 65535
< use_sipauth> - Use SIP authentication credentials when registering with the SIP proxy.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0
Allowable Range:
0 - Disable
1 - Enable
< sip_username> - The user name with which the phone will authenticate with the SIP proxy if <use_sipauth> is
enabled.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 49
< sip_password> - The password with which the phone will authenticate with the SIP proxy if <use_sipauth> is
enabled and < sip_username> is defined.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 14