ClearOne MAXAttach IP - Manual (Page 20)

Chapter 2: Getting Started 17
Configuration: General Settings Screen
Use the Configuration: General Settings screen (Figure 2.6) to set up Security, Provisioning, the Help line number, and
when a Reboot of the phone is allowed.
• Security: To change your username and/or password, enter the new username and/or password in the appropriate
fields and then click the Apply button.
• Provisioning: Click the Use local settings radio button if you wish to use the settings programmed into your MAX
IP phone, including IP address, audio settings, and VLAN settings. Use this option if TFTP via DHCP is unavailable
or if you wish to manually provision your phone.
Click the Use DHCP/TFTP radio button to set the TFTP IP address. The IP address of the TFTP server can be
provided by the DHCP server or you can enter it manually. If the TFTP address is provided by the DHCP server,
then click the TFTP Address from DHCP radio button; if the TFTP server is set manually, then click the Use TFTP
Server radio button and enter the IP address of the TFTP server.
Click the Apply button to activate the changes.
• Phone Numbers:To change or set the phone number for the help line, enter the phone number for the help line into
the Help line number field and then click the Apply button.
• Reboot: Choose when you wish to allow a reboot of the MAX IP phone. Click the Allow reboot during a call radio
button to allow a reboot while a call is in progress or click the Wait until current call ends radio button to allow a
reboot only after a call is completed.
Click the Apply button to store any changes made.
Figure 2.6 - Configuration: General Settings Screen