ClearOne MAXAttach IP - Manual (Page 15)

12 Technical Support: 800.283.5936
< tls_local_cert> - The TLS Local Certification. Enter the location of the certification file or use the Browse button
and navigate to the location.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 49
< tls_ca_cert> - The TLS CS Certification. Enter the location of the certification file or use the Browse button and
navigate to the location.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 49
< dtmf_relay_enable> - The DTMF Relay Enable.
Default Value: 1
Allowable Range:
0 - Disable
1 - Enable In-bound DTMF Relay
<dtmf_relay_type> - The DTMF Relay Type to be enabled.
Default Value: 1
Allowable Range:
0 - Use DTMF over SIP
1 - Use DTMF over RTP
< dtmf_relay_payload> - The DTMF Relay RTP packet Payload.
Default Value: 97
Allowable Range: 96 - 127
Configuration: Audio Parameters
See Configuraton: Audio Settings details on pages 23-24 for information on how to set these parameters through the
Web Portal.
<
vad_enable> - Enable Voice Activity Detection.
Default Value: 1
Allowable Range:
0 - Disable
1 - Enable VAD
< vad_noise_match> - Defines the VAD Noise Matching algorithm.
Default Value: Level
Allowable Range:
None - Disabled
Level
g711a2
< vad_noise_order> - The VAD Noise Order.
Default Value: 5
Allowable Range: 0 - 10
< g711ulaw_priority> - The G.711 ulaw audio codec Priority.
Default Value: 255
Allowable Range: 1 (Lowest) to 255 (Highest)
< g711Alaw_priority> - The G.711 Alaw audio codec Priority.
Default Value: 254
Allowable Range: 1 (Lowest) to 255 (Highest)