ClearOne MAXAttach IP - Manual (Page 12)

Chapter 2: Getting Started 9
Configuration: Dial Plan
For information on configuring a dial plan, see Configuration: Dial Plan screen on page 19.
<
dialplan> - The filename on the TFTP server containing the Dial Plan file.
Default Value: Undefined
Allowable Values: ASCII text filename limited by the filename length limit on the TFTP server.
Configuration: Network Settings
See Configuration: Network Settings details on page 20 for information on how to set these parameters through the
Web Portal.
<
SNTP_server_1> - SNTP 1 server IP address.
Default Value: 0.0.0.0
Allowable Values: 0.0.0.0 (Disabled) or Valid IP Address.
< SNTP_server_2> - SNTP 2 Server IP Address.
Default Value: 0.0.0.0
Allowable Values: 0.0.0.0 (Disabled) or Valid IP Address
< qos_precedence> - Quality of Service Precedence.
Values 0-7 sets a static TOS DSCP hex value according to the list below.
A value of 8 allows a valid custom hex setting to be entered.
Default Value: 5
Allowable Range:
0 - DSCP = 0x00
1 - DSCP = 0x08
2 - DSCP = 0x10
3 - DSCP = 0x18
4 - DSCP = 0x20
5 - DSCP = 0x28
6 - DSCP = 0x30
7 - DSCP = 0x38
8 - DSCP = CUSTOM
< qos_custom_dscp> - Quality of service Custom DSCP. Valid if qos_precedence is set to 8.
Default Value: N/A
Allowable Range: 0x00 to 0x3F
< vlan_enable> - The Virtual LAN Enable
Default Value: 0
Allowable Range:
0 - Disable
1 - 4094 Valid LAN ID
< vlan_priority> - Sets the Priority that VLAN tags outbound packets.
Default Value: 0
Allowable Range: 0-7