LaMotte TC-3000 Tri-Meter - Manual (Page 56)

6. Remove the tube from the meter.
Empty the tube. Rinse the tube with
the color standard. IMPORTANT:
While the tube is inverted, wipe the
lip of the tube to remove droplets
of liquid that may be present. This
will prevent liquid from being
trapped under the ring when the
tube is returned to an upright
position.
7. Fill the tube to the fill line with the
color standard. Pour the blank down
the inside of the tube to avoid
creating bubbles.
8. Cap the tube. Wipe the tube
thoroughly again with a lint-free
cloth.
9. Open the meter lid. Insert the tube
with the color standard. Align the
index notch on the positioning ring
with the index arrow on the meter.
Close the lid. Press
*IOK to select
Scan Sample .
C o l o r
* S c a n S a m p l e
€
1 6 : 0 2 : 1 9 0 1 / 0 4 / 0 5
10. View the result. C o l o r
2 8 . 0
c u
* S c a n S a m p l e
€
1 6 : 0 2 : 1 9 0 1 / 0 4 / 0 5
56 ANALYSIS & CALIBRATION • COLOR